New Rochelle Premium Roofing provides professional fascia, soffit and cornice work in New Rochelle, NY for residential and commercial properties across Westchester County. The roof edge on a pre-war New Rochelle house is joinery, not trim. Built-up wood cornices, moulded bed and crown stock, exposed or boxed rafter tails and a fascia sized to carry a gutter all have to be rebuilt as carpentry rather than covered over.
Rot arrives from behind, which is why it is missed. Water gets past a failed drip edge or an overflowing gutter, soaks the fascia from the back face where nobody looks, and works into the rafter tail. By the time paint is failing on the front, the tail is often gone six or eight inches back from the plumb cut and the gutter has nothing sound left to hang from.
We cut back to sound wood and scarf in new stock, sistering rafter tails from a template so the profile and the projection match the original exactly. Cornice moldings are milled against a salvaged length rather than approximated from whatever stock knife happens to be closest. Every piece is then sealed on every face, cut ends included, before it is lifted into position. Back-sealing is the unglamorous step that decides how long the whole repair lasts.
Aluminum and vinyl wrap is what we are usually asked for and usually argue against. Cladding seals in whatever damp the wood already carries, conceals the following decade of rot entirely, and on a house of this vintage it flattens the shadow lines that give an eave its depth. There are houses where wrap is a reasonable economy and we will say so, but a 1928 center-hall colonial is not one of them.
Many of these houses have an open cornice with no soffit plane at all, which matters for more than appearance. There is nowhere to fit a soffit vent, so any intake ventilation has to come from a vented drip edge or a discreet detail worked into the fascia, and that has to be designed alongside the roof rather than improvised afterward. Intake has to exist somewhere or the assembly does nothing.
This work is sequenced with the covering deliberately. Fascia and cornice are rebuilt while the eave courses are already lifted and the gutter is off the building, because doing it afterward means disturbing new slate, re-hanging courses that were just set, and paying twice for exactly the same access. Sequencing is where a good deal of the real saving on this work actually lives.
Our licensed and insured team brings the right materials and equipment to every job — lead-coated copper step and pan flashing, twenty-ounce cold-rolled copper valley linings, slate rippers and copper bib repairs, stainless slate hooks set at the head lap, semi-weathering gray and unfading green roofing slate, terne-coated stainless bay-roof pans — and backs the work with a written workmanship warranty. We serve New Rochelle and nearby communities including Larchmont, Mamaroneck, Pelham, Pelham Manor.
What We Handle
Everything our fascia, soffit and cornice work in New Rochelle covers
One crew, one point of contact, and the full range of fascia, soffit and cornice work work in New Rochelle, NY. If it is on this list we do it in house rather than handing it to a subcontractor:
- fascia repair new rochelle
- fascia soffit and cornice work
- soffit replacement westchester
- rotted fascia board repair
- wood cornice restoration ny
- rafter tail repair
- fascia soffit cost new rochelle
- aluminum wrap fascia
- open cornice ventilation
- eave repair new rochelle
- trim carpentry roof edge
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our New Rochelle services.
Materials, equipment and how we do fascia, soffit and cornice work
The difference between fascia, soffit and cornice work that lasts and fascia, soffit and cornice work that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with lead-coated copper step and pan flashing, twenty-ounce cold-rolled copper valley linings, slate rippers and copper bib repairs, stainless slate hooks set at the head lap, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every New Rochelle job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in Westchester County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do fascia, soffit and cornice work outside New Rochelle
New Rochelle Premium Roofing covers New Rochelle and the surrounding communities of Westchester County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Fascia, Soffit and Cornice Work in Larchmont, NY — Westchester County, population 6,630
- Fascia, Soffit and Cornice Work in Mamaroneck, NY — Westchester County, population 20,151
- Fascia, Soffit and Cornice Work in Pelham, NY — Westchester County, population 7,326
- Fascia, Soffit and Cornice Work in Pelham Manor, NY — Westchester County, population 5,752
- Fascia, Soffit and Cornice Work in Scarsdale, NY — Westchester County, population 18,253
- Fascia, Soffit and Cornice Work in Eastchester, NY — Westchester County, population 20,901
Start on the New Rochelle Premium Roofing homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why New Rochelle Chooses New Rochelle Premium Roofing
- ✓We give the covering, the flashing metal and the fasteners three separate remaining-life numbers, because on a Westchester roof they almost never run out together
- ✓Slate relay and full replacement are quoted as two priced lines, with the expected breakage percentage written down before anyone climbs
- ✓We will not coat slate, clay tile or an asphalt shingle roof, and we will explain on site what a coating does to the salvage value
- ✓Every slate we lift comes off with a ripper and goes back on a copper nail or a stainless hook, never face-nailed through the exposure
The standards behind fascia, soffit and cornice work
Quality here is not a matter of opinion — it is written down. The fascia, soffit and cornice work work we do in New Rochelle follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every fascia, soffit and cornice work project in New Rochelle gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free fascia, soffit and cornice work free estimate in New Rochelle, or request a quote and we'll get right back to you.